澳门新葡新京官方网站-葡京网址官方网址

Product Matching device

Mobile single screw pump

Mobile single screw pump

Contact Us

Product Details

Brief introduction

Single screw pump is an important fluid conveying equipment. It is widely used in various industrial processes, also known as eccentric screw pump, G-type screw pump or electric single screw pump, because it is not only suitable for medium with low viscosity such as water, but also for suspension with solid particles or short fibers, and medium with very high viscosity.

Xinglong single screw pump is a kind of positive displacement pump, through the meshing pairs (stator and rotor) between the closed formation of a certain geometry cavity to transport liquid. The material of pump overflow parts is determined according to the specific characteristics of fluid materials transported.

The mobile single screw pump adopts the design of trolley equipment (such as trolley, trolley, lifting device). It can be moved to the work site where the medium needs to be pumped. When the conveying process is completed, it can be pumped to the temporary warehouse. It can be designed vertically, can lift the oil tank emptying condition, can also be installed on the trolley or the horizontal / inclined design of the trolley, which is convenient for users to use flexibly. The movable single screw pump is often used for the working conditions of the installation of the mobile trolley.

移动式澳门新葡新京官方网站.png

Advantages

The pump can adapt to the application of mobile working conditions, and it can be designed horizontally / vertically / obliquely

Continuous low pulsation conveying

Media will not be agitated, squeezed or sheared during pumping

The conveying capacity is directly proportional to the rotating speed, and the conveying capacity can be adjusted by frequency conversion, with high precision metering conveying

efficient

All liquids can be pumped with minimal agitation and pulsation

Easy maintenance


For you to solve transport requirements include

The whole series is standardized, and the maximum flow can reach 10 m3 / h

Output pressure up to 18 bar

Different materials can be used for overflow metal parts, from tool steel to nickel / chromium steel, high acid resistant materials such as duplex stainless steel, Hastelloy and titanium alloy

Different stator rubbers are used, such as NBR, EPDM, CSM, PTFE, FPM and HNBR.

Standard mechanical seal, other seal forms can also be selected


Strict quality standards and test procedures ensure that you get the best performance screw pump. We continue to provide after-sales technical support (4008055600) to ensure the best performance under various service conditions.


XML 地图 | Sitemap 地图